Solutions for your safety

Type: BMS01

Description

The BMS01 is a battery master switch designed for dangerous goods road vehicles complying with international ADR regulations. Environmental protection and the intrinsically safe control circuitry of the BMS01 are in accordance with ADR 2009. The battery switch must be installed between the battery and the vehicle’s electrical system. It is operated on and off by means of a control switch in the driver’s cab, additional control switches can be sited around the vehicle as required. The BMS01 is a double pole device, but can be connected as 1-pole version (see connection diagram).

An integral safety barrier permits siting of the BMS01 in hazardous areas. Additional auxiliary contacts are provided for disconnection of the ignition circuit, de-energisation of the alternator field winding, or a controlled shutdown of the CANBUS system followed after a delay by disconnection of the battery.

Downloads

Technical Data

Technical Data

Voltage rating 
  • DC 24 V
  • DC 12 V
Current ratings  from 200A to 200A  
Typical life 10,000 cycles at rated current
100,000 cycles mechanically
Interrupting capacity Icn 2,400 A 1 s
600 A 20 s
Number of poles 
  • single pole 
  • double pole 
Terminal design 
  • screw terminals 
Actuation 
  • without actuation 
Auxiliary contacts 
  • without auxiliary contacts 
Water splash protection 
  • with water splash protection 
Illumination 
  • without illumination 
Approvals e1, CE, ATEX

Accessories

Accessories

Order numberDescription
X 222 581 014-pin connector CTRL
Y 307 977 01connector sleeve, NW10
Y 307 979 01connector sleeve, d = 11 mm
XSB-A-...control switch
X 223 685 01ADR switch
XSB-B-...control switch
X 222 580 017-pin connector AUX
Y 307 978 01connector sleeve, NW 10

Applications

Applications

  • Commercial Vehicles